HOT WATER GENERATORS
For air cooling applications. Any connection location or rows deep available. Circuited for best performance at lowest water pressure drop. No trapped circuits for best drainability are standard, or pitched casings with auxiliary drains are optional.
Cool air with evaporating refrigerants. Available with single or multiple circuits, face or depth control or with interlaced circuits for best temperature distribution.
Any casing size, connection location or rows deep available. Circuited to provide maximum performance at the lowest water pressure drop.
For above freezing air heating applications. Any casing style, connection location or rows deep available. One pass as shown, or return bend type also available.
Inner distributing tubes improve freeze resistance and promote more even coil temperatures under low load conditions. Any with casing size or connection location, one or two rows deep.
FLEXIBLE TUBE STEAM
Offset bent tubes reduce expansion stresses where tubes are locked between headers at opposite ends. Available as one or two rows deep.
HOT WATER BOOSTER
Small coils for reheat applications, slide in with minimal effort from one side of duct - tube sheet covers the whole cut for installation. Also available with standard flanged or slip and drive style casings.
Sectioned to fit through narrow doorways, multiple coils in single casings, lifting brackets, airtight covers, drain pans, insulated housings or whatever you need. Let us know.